fbpx

Security is our business

Surveillance system Management
The best way to predict the future is to create it
Industry and workplace Skill transfer
The best way to predict the future is to create it
Perimeter protection
The best way to predict the future is to create it
previous arrow
next arrow
Slider

Contact address

Q7 - 9 Feliz Stalls

Kahawa Sukari Avenue, Kahawa Sukari

Off Thika Superhighway

Nairobi

TELEPHONE CONTACT

+254 725 579251  |   + 254 731 983372

Email: This email address is being protected from spambots. You need JavaScript enabled to view it. 

Training Events- Calendar Module

December 2019
S M T W T F S
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31

Practical Electric Fencing Specialist- Training Course

Tour Types

Class

Price

$150

March 18 @ 09:00 - March 20 @ 16:30 EAT 

Practical Electric Fencing Specialist- Training Course

 Introduction

Living in a region where insecurity is a challenge, most residential owner find it indispensable to have electric fence installed on their perimeter walls

There are a few obvious advantages to electric fencing as a security barrier on your perimeter walls, as it acts as:

  • A physical barrier,
  • A psychological barrier, and
  • An early warning system.

The visual appearance thereof will be a definite deterrent to a potential intruder as it will cause a delay to enter your property and also when they want to exit again.

Skills on how to install such a perimeter security enhancement are offered at our institute to give young persons an expanded skill base which can earn them more when called upon to carry out suchlike jobs.


Who is this course intended for?

  • Anyone Interested in becoming an Electric Fence Dealer
  • Installers and Technicians
  • Project Managers
  • Security Managers
  • Building Contractors
  • Engineers and Consultants
  • Sales Staff of electronic security equipment
    A trainee learning how to install E-Fence on a model Fence at our workshop

Compulsory class day 1:

Topics covered will be;

  • Electric fencing components;
  • Basic electronic and electrical theory;
  • Basic electronic and electrical components and equipment;
  • Basic electronic and electrical theory as applied to electric fencing;
  • Installation configuration, quotation, work plans and administration;
  • Completing the Electric Fencing System Certificate of Compliance.

 

Compulsory class day 2& 3:

Training will consist of extra topics not required for examination purposes, covering aspects of;

  • Earthing systems;
  • Overvoltage, electromagnetic interference and ground potential;
  • Metrology;
  • Communication systems;
  • Electric fence circuits, monitoring systems and electrical systems;
  • Review of assignments.

 

Examination and assessment day 2:

A trainee getting the fundamentals of gate and corner pole installation.
  1. Written multiple choice question paper, covering;
  • Electric fencing components;
  • electronic and electrical theory;
  • electronic and electrical components and equipment;
  • Basic electronic and electrical theory as applied to electric fencing;
  • Installation configuration, quotation, work plans and administration.
  1. Practical exam 1 – covering aspects of finding faults on an electric fence.

Examination and assessment day 3:

A practical exam during which the learner has to erect a fully functional replica of an electric fence.

Should the learner be found to be competent, in; the two written exams; the two practical exams; and structured questions, the candidate will be declared competent as an ‘Electric Fence System Installer’.

Tools required for compulsory classespractical projects, examinations and assessments:

A learner shall be responsible for supplying his or her own hand tools and instruments for this purpose. A short list of which is as follows:-

  1. Side cutters and pliers – to be used on electric fencing wire.
  2. Small flat screw driver – to be used for tightening wires into connectors.
  3. Large flat screw driver – to be used for tightening self-tapping screws.
  4. Hack saw – for cutting conduit.
  5. Spring – for bending 20mm conduit.
  6. Hand held multi-meter – capable of measuring resistance, voltage and current, with both DC and AC settings.
  7. Hand held volt meter – measuring electric fence high voltage.
  8. Hand held soldering iron, with solder.
  9. Safety boots and overalls.

This training will lift you from zero skills to a skilled and ready installer for all types of electric fences.

It will take you through the fence design, material selection, costing, implementation, commissioning and maintenance.

Course to cover the following types of fences:

  • Free Standing Electric Fence

  • Top Wall Electric Fences

  • Custom Installed Electric Fences

Also to be covered would be:

  • Electric Fences Energizer types

  • Types Electric Fences wires

  • Electric Fences poles and their preparation

Organiser

KENVISION TECHNIKS LTD
Phone:
+254 +254 (0)20 5295138/ 0725579251
Email:
ken_trainers@kenvisiontechniks.com
Website:
www.kenvisiontechniks.com

Contact Map