Loading Events

« All Events

Total Property Security Systems Installation Course

April 16 @ 08:30 - May 9 @ 16:30 EAT

520USD

Introduction

Comprising of Five Critical Property Protection systems, this course will leave the learner well equipped with the skills that any installer and security manager would need to prove his worth.

The systems to be practically taught in this unique skills program will comprise of:

I. CCTV over IP  & Basic Networking Skills (KES 19,000/-)

II. Card & Biometric-Based Access Control Systems (15,000)

III. GSM-Controlled Burglar Alarm systems (12,000/-)

IV. Electric Fencing Skills (12,000/-)

V. Fire Detection, Design, Installation, Testing & Fire Alarm Maintenance (KES 30,000)

 Note:

Pay USD 520 or KES 52, 000/!! When you take up all the units together.

It takes three weeks to complete the five units.

 


CCTV over IP  & Basic Networking Skills

INTRODUCTION

This training will explain the basics of some of the most popular technologies used in networking, CCTV Camera basics, configuration and management including but not limited to the following:

Types of Networks – including LANs, WANs

The Internet and Beyond – The Internet and its contributions to intranets and extranets

Types of LAN Technology – including Ethernet, Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, PoE, etc

Networking and Ethernet Basics – including standard code, media, topographies, collisions and CSMA/CD

Ethernet equipment– including transceivers, network interface cards, hubs and repeaters.

 This 5-DAY course is designed to give participants a practical knowledge of the Operation and Installation of CCTV Systems at:

  • FOUNDATION LEVEL and then Gradually introduce them to a Higher Level of CCTV cameras that deals with
  • IP Cameras and
  • Networking Skills.

For more of the course details, find them on: CCTV IP Camera Installation & Basic Networking Skills Course

SYNOPSIS

Security comes second in the Maslow’s hierarchy of needs indicating how basic and critical it is in our very existence. In fact unless it is assured, no nation or individuals can move up the ladder of our needs. Apparently it has become quite an issue everywhere in the world.

CCTV is one of the surveillance technologies that have emerged as preferred methods of pre-emptive countermeasures in public and private spaces.

dsc01083NB:

  • Ever wanted how to know how to create a simple working network of devices?
  • What about mobile network configurations?
  • Still not clear about basic cabling techniques, various types cables, their data carrying capacities (bandwidth), their terminations, associated devices, etc
  • What about IP Addressing (NAT)?
  • Do you consider knowledge of how switches, routers, bridges, servers, etc work to be of great value to the kind of technician you want to be?

You can get these skills and much more as extras when you enroll on our IP CCTV Training Program. This course is founded on giving you the best skills you can get on Surveillance Design techniques using customized auto-cad application, lens calculators, measuring PPM, handling resolutions, understanding aspect ratios, lighting, configuring IP cameras to according to streaming standards such ONViF, PSIA, etc…

 

For more of the course details, find them on: CCTV IP Camera Installation & Basic Networking Skills Course

Qualification: On completion of the Course, having been successful in TWO examinations (one written, one practical) the participant will receive a Certificate of Proficiency from KENVISION TECHNIKS TRAINERS

For more of the course details, find them on: CCTV IP Camera Installation & Basic Networking Skills Course


Card & Biometric-Based Access Control Systems

Learn How to Plan, design, install, configure, commission and manage Access Control Systems in various environments including but not limited to:

Private / Exclusive properties, College offices and classes, club houses, hospitals, county offices, hotel suites, parking zones, shopping centre drive-ins, etc


How You will Benefit

1. Understand the fundamental elements that make up an Access Control System.
2. Fit the principal components of a stand-alone system and networked systems.
3. Connect and programme a card, keypad and proximity stand alone system.
4. Effectively connect up, test and fault-find system elements.
5. Be aware of the issues associated with Access Control Systems.
6. Have an awareness of the changing technology and it’s impact on the industry

Click on the following link to download the detailed Access Control Course Outline

What you will learn

• How to conduct a site survey to the requirements of the client.
• How to select correct power supplies and electronic components with appropriate test equipment
• How to install door entry systems
• How to install standalone access control systems
• How to select locks
• How to programme access control software
• How to install networked access control systems
• How to select and adjust door furniture
• How to install control equipment
• How to select appropriate use of card tokens and keypad identification methods
• How to design a system and prepare specification

Click on the following link to download the detailed Access Control Course Outline

Maglocks and Exit emergency switches in our workshop

Course Content

  • Mechanical and electromagnetic locks
  • Electric strikes and releases
  • Identification, tokens and readers
  • Power supplies and sensors
  • Card based ID system, controllers and systems
  • Location of sensors
  • Frequency of use and operation, locations and sensors
  • Fitting devices onto framed constructions
  • Single and multi door systems and closures
  • Methods and types of cables to use in various environments
  • Risk assessment
  • Practical on site surveys
  • Planning and design of system
  • Maintenance agreements
  • Knowledge possession
  • Code identification systems
  • Non-contact identification methods
  • Networking access control systems
  • Fault finding techniques
Installing Access Control Devices in our workshop

Fact File

Who should attend?

  • This course has no prerequisites and is aimed specifically, though not exclusively, at those wishing to change their careers.
  • Those already in the Security industry and need to specialize in Access Control systems

Those who have been carrying out access control installations but require certifications in the area to prove their abilities.


GSM-Controlled Burglar Alarm systems

Trainee connecting up an alarm systems

Theory will include:

  • Wiring Series, Parallel, End of Line and Fully Supervised Loop Alarm Systems
  • Identify and use resistor colour codes
  • Planning and installing alarm systems
  • Operation of Passive Infra Red, Panic Attack, Door Contact, Dualtec Inertia Detectors and Alarm Sounders
  • Understanding alarm terminology
  • Understanding programming features and structures
  • Understanding good practices of installing and servicing alarm systems

 

Tasks will include:

  • Correct use of meters to obtain readings
  • Correct identification of resistors by using colour codes
  • Running, stripping and connecting cables
  • Installing Series Alarm Systems with sounders and multiple detectors
  • Installing End of Line Alarm Systems with sounders and multiple detectors
  • Installing Fully Supervised Loop Alarm Systems with sounders and multiple detectors
  • Connecting and using detectors
  • Programming alarm control units
  • Completing documentation
  • Testing and fault finding alarm systems
  • – Alarm system for single family house, based on OptimaGSM panel.
    – Analog value control (AI) ie. battery voltage measurement, humidity measurement.
    – SMS, VOICE notification.

Click the following Link to download the GSM-Controlled Burglar Alarm systems


Electric Fencing Skills

Domestic E-fence installation

Compulsory class day 1:

Topics covered will be;

  • Electric fencing components;
  • Basic electronic and electrical theory;
  • Basic electronic and electrical components and equipment;
  • Basic electronic and electrical theory as applied to electric fencing;
  • Installation configuration, quotation, work plans and administration;
  • Completing the Electric Fencing System Certificate of Compliance.

 

Compulsory class day 2:

Training will consist of extra topics not required for examination purposes, covering aspects of;

  • Earthing systems;
  • Overvoltage, electromagnetic interference and ground potential;
  • Metrology;
  • Communication systems;
  • Electric fence circuits, monitoring systems and electrical systems;
  • Review of assignments.

Click the following Link to download the Electric Fencing Skills training

 

 


Fire Detection Design, Installation, Testing & Fire Alarm Maintenance Training

Fee: KES 30,000/-     USD: 300 or KES 30,000/-

Venue: Kenvision Techniks Workshops

Synopsis

Why is electrical knowledge important in fire alarm installation?

It is very important to understand the association between fire alarm installation and electrical installation. In order to install and maintain a fire alarm system, a basic knowledge of electrics is a must.

Not all fire alarm systems demand a mains connection, there are smoke detectors which sometimes do not require a mains connection in domestic dwellings. It all depends on the grades of the system.

However, when a fire alarm system is connected to the mains, it should comply with the standards.

Course Objectives

During our Fire Alarm Installation course, you will learn a range of industrial fire alarm panels and associated components. You will learn how the devices fit into the system, how they function and the way in which they should be configured, connected and tested.

On-going assessments ensure that you are able to meet the objectives of the course.

At the successful completion of this course, the learner will be able to:

  • Demonstrate the basic key concepts and all the components used in fire alarm systems.
  • Install, test and maintain conventional and addressable fire alarm systems.
  • Recognize the role of fire alarm outputs, automatic and manual fire detectors.
  • Describe the differences between fire alarm categories and grades.
  • Explain the role of a fire alarm installer.
  • Effectively work with other stakeholders in fire alarm installation.

Organiser

KENVISION TECHNIKS LTD
Phone:
+254 +254 (0)20 5295138/ 0725579251
Email:
ken_trainers@kenvisiontechniks.com
Website:
www.kenvisiontechniks.com

Venue

Kenvision Techniks Institute
Q7-Q9 FELIZ BUILDING- KAHAWA SUKARI
NAIROBI, NAIROBI 00200 Kenya
+ Google Map
Phone:
254 (0)20 5295138 / 731 983372 / 725 579251
Website:
https://kenvisiontechniks.com
Facebook Auto Publish Powered By : XYZScripts.com