A friend of mine called me this afternoon regarding a situation he was finding difficult to sort out. A Nairobi customer had called him to go down to his house to install an IP CCTV system. Apparently, this customer having all the money to blow around headed to China last month and brought with him some IP cameras and other associated equipment. With no proper advice, this guy bought the equipment with very little regard to technical fine print that these articles are architectured to. As a result he ended up with a PoE Class A (1)  switch and PoE Class B (2) IP Cameras. These are details salesmen will not bother to explain to a customer for the simple fact that they too are in the dark. PoE is PoE (According to them).

To cut the story short,  what he brought from our Chinese bothers is a group of devices that cannot communicate with each other just as he could not easily communicate with those who sold them to him.

Let me break down some facts regarding PoE:

PoE was supposed to be simple. PoE classifications and how to factor PoE class into your system designs.

Are you aware that PoE was, and is, supposed to make the powering of devices easy. Basically, this is what happens:

It is easy to be too far away from the truth to be corrected

You take your camera or other device that accepts power via the Ethernet port, you plug in the RJ45 jack to the port, and you walk away. Inside the head end, you plug the other end of the same Ethernet cable into a PoE switch or PoE injector and voila, power is magically delivered to the device along with the data connection. In theory, all of the normal worries are gone. AC power or DC power is irrelevant, and you don’t even have to worry about over-powering a camera that, were you to fry it, could potentially set you back a few thousand dollars in equipment costs and man hours!

PoE was supposed to be this way, but practical reality has diverged from the perfect world concept in such a way that the actual installation is almost never that easy. So set aside the “perfect world” notions you have, and let’s start with the basics, so you can understand how PoE works.

There are four classes of PoE: Class 1, 2, 3 and 0. Each PoE classification denotes a range of power that is available to the end device as well as the power that must be available on the port of the power sourcing equipment (PSE):
Here are the current PoE Classifications

•    Class 1  —  4.5 watts at PoE port; 3.84 watts at device

Current PoE Classes

•    Class 2 —  7.5 watts at PoE port; 6.49 watts at device
•    Class 3 —  15.4 watts at PoE port; 12.95 watts at device
•    Class 4 –  Reserved as Class 0
•    Class 0 —  15.4 watts at PoE port; .44 to 12.95 watts at device

In the world of PoE there are two kinds of switches that can provide PoE; the kind that operates with a “guarantee per port” and the kind that operates with a “total power budget”. Both kinds of switching are useful but there is a significant difference between them. If you happen to have a switch nearby, look at it and see if you can tell into which one of the above two categories your switch falls.

A switch that guarantees a certain wattage per port — 15.4 watts per port, for example — means that you can be sure that no matter how many Class 3 or Class 0 devices are plugged in, the switch will be able to power them. Of course, these switches tend to be bigger, more expensive and ill-suited for use outside of a nice climate controlled room, but they do prevent errors in power planning.

The second type of switch mentioned above — the kind with a total power budget — can only power as many PoE devices as it has power to spare. Imagine that you are working with a 4-port switch that carries a total power budget of 30 watts. This kind of switch could power four Class 2 cameras (4 devices x 7.5 watts = 30 watts needed). It could also easily power four Class 1 devices (4 devices x 4.5 watts = 18 watts needed). Continuing with that math, it would be able to power Class 3 or Class 0 devices, but it could only power two of those types of devices.

Power planning is whe

Are the devices talking power-wise? What are their classes?

re the rubber meets the road, and it brings up a challenge in our industry.

What happens if a chosen device (i.e., a PoE powered camera) does not clearly specify the PoE class and instead simply gives an operating wattage? You might think that this is OK since a camera which says “6.01 watts” is within the Class 2 specifications and therefore must be Class 2. But that’s where reality often diverges from common sense. In theory, what is supposed to happen is that a device is clearly labeled with a PoE classification so that when said device is plugged into a PSE device, the power budget has been worked out such that each device will receive its required PoE.

This item (write up is not complete). Probably, you would want to know more about this PoE and other issues touching on IP cameras and associated equipment. It is not too late. You can attend one of our premier CCTV IP Surveillance Courses and get more informed about this issue and much more.

Comprehensive CCTV Surveillance Training: 21/Mar – 1/Apr 2016

Save


One thought on “PoE SHOWDOWN WITH KNOW-IT-ALL KENYAN

Comments are closed.